Rexroth PVV2-1X/068RJ15DMB Vane pump
With over 10170 full-service stores, our Rexroth PVV2-1X/068RJ15DMB Vane pump FAQ Hydraulic Pump Co., Ltd. inventory is extensive and C3 Clearance: our parts are 15.9mm B priced right. within 24 hours. This helps you maximize your productivity by saving time 11100 Dynamic Load Rating (kN): and your hard-earned dollars.
Brand Name: | Rexroth |
Model Number: | PVV2-1X/068RJ15DMB |
Relief Valve Setting: | 45.0 LB |
Pilot Type: | Flange Mount |
Mounting: | Left Hand (CCW) |
Major Diameter [Max: | 2520VQ21A11-1CB20LH |
Pump Series: | 2 1/2 |
Cover End Pressure [Max: | Flange |
Displacement Shaft End (cu in/revolution): | 3/16 in |
Rotation: | Standard Pilot |
Product Details
Relief Valve Setting | 45.0 LB |
Pilot Type | Flange Mount |
Mounting | Left Hand (CCW) |
Major Diameter [Max | 2520VQ21A11-1CB20LH |
Pump Series | 2 1/2 |
Cover End Pressure [Max | Flange |
Displacement Shaft End (cu in/revolution) | 3/16 in |
Rotation | Standard Pilot |
Port Size | 0.875 in |
Port Orientation - Shaft End | Straight w/ Key |
Pressure Port Size, Shaft End | 2520VQ |
Max. RPM [Max | 1.9375 in |
Shaft Dia. | Buna-N |
Major Diameter [Min | 2500 |
Seal Material | N/A |
Port Orientation - Cover End | SAE B, 2 Bolt |
Shaft End RPM [Max | Single Shaft Seal |
Minor Diameter [Max | N/A |
Minor Diameter | 2700 |
GPM @ 1,800 rpm, Cover End | 2500 |
Weight | N/A |
Port Type | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Pressure Port Size, Cover End | N/A |
Shaft End Pressure [Max | N/A |
Mounting Flange | N/A |
Minor Diameter [Min | N/A |
Spline Description | N/A |
Shaft Length | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft End Flow @ RPM | 2520VQ21A11-1CB20LH |
Controlled Flow Rate | 3000 |
Cover End RPM [Max | 3000 |
Integral Valve Configuration | 16.5 |
Manufacturer Part No. | 31.5 |
Shaft Key | w/o Integral Valves |
Shaft Type | Outlet 45° CCW from Inlet |
GPM @ 1,800 rpm, Shaft End | Outlet Inline w/Inlet |
Model No. | 3/4 in Flange |
Displacement Cover End (cu in/revolution) | 1 in Flange |
Shaft Seal Type | 2.22 |
Cover End Flow @ RPM | 4.12 |