Rexroth PVV5-1X/193RA15DMB Vane pump
With over 10170 full-service stores, our Rexroth PVV5-1X/193RA15DMB Vane pump inventory is extensive and our parts are priced right. within 24 60mm d hours. This helps you maximize 6400 Limiting Speed Rating (r/min): your FAQ Hydraulic Pump Co., Ltd. productivity by saving time and your hard-earned dollars.
Brand Name: | Rexroth |
Model Number: | PVV5-1X/193RA15DMB |
Port Type: | 45.0 LB |
Shaft Dia.: | Flange Mount |
Mounting: | Left Hand (CCW) |
Rotation: | 2520VQ17A14-11CC20-LH |
Minor Diameter: | 2.5 |
Model No.: | Flange |
Major Diameter [Max: | N/A |
Pressure Port Size, Shaft End: | Standard Pilot |
Product Details
Port Type | 45.0 LB |
Shaft Dia. | Flange Mount |
Mounting | Left Hand (CCW) |
Rotation | 2520VQ17A14-11CC20-LH |
Minor Diameter | 2.5 |
Model No. | Flange |
Major Diameter [Max | N/A |
Pressure Port Size, Shaft End | Standard Pilot |
Port Orientation - Shaft End | 0.875 in |
Major Diameter [Min | 13 Tooth Splined |
Shaft Length | 2520VQ |
Controlled Flow Rate | 1.375 in |
Shaft Seal Type | Double |
Shaft Type | Buna-N |
Pump Series | 2500 |
Shaft End Pressure [Max | 0.715 in |
Spline Description | SAE B, 2 Bolt |
Displacement Cover End (cu in/revolution) | Single Shaft Seal |
Cover End Pressure [Max | 16/32 |
Seal Material | 2700 |
Port Size | 2500 |
Pilot Type | N/A |
Pressure Port Size, Cover End | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Manufacturer Part No. | 0.873 in |
Shaft Key | 0.872 in |
Cover End RPM [Max | N/A |
Max. RPM [Max | N/A |
Port Orientation - Cover End | N/A |
Mounting Flange | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Weight | 2520VQ17A14-11CC20-LH |
Minor Diameter [Min | 2000 |
Integral Valve Configuration | 3000 |
Cover End Flow @ RPM | 21 |
Displacement Shaft End (cu in/revolution) | 3.4 |
Shaft End Flow @ RPM | w/o Integral Valves |
Minor Diameter [Max | Outlet 45° CW from Inlet |
GPM @ 1,800 rpm, Cover End | Outlet Inline w/Inlet |
Shaft End RPM [Max | 3/4 in Flange |
Relief Valve Setting | 1 in Flange |
GPM @ 1,800 rpm, Shaft End | 2.8 |