Rexroth M-2SEW6N3X/630MG24N9K4 THROTTLE VALVE
How do I 4.1 Hz Characteristic outer ring frequency, BPF0 place FAQ Hydraulic Pump Co., Ltd. an EMERGENCY order for a Rexroth M-2SEW6N3X/630MG24N9K4 THROTTLE VALVE that I want to pick up at a our 119 mm da max store?
| Brand Name: | Rexroth |
| Model Number: | M-2SEW6N3X/630MG24N9K4 |
| Shaft Length: | 76.0 LB |
| Shaft End Pressure [Max: | Flange Mount |
| Model No.: | Right Hand (CW) |
| Pressure Port Size, Shaft End: | 3525V25A17-1AC22R |
| Rotation: | 3 |
| Major Diameter [Min: | Flange |
| Displacement Shaft End (cu in/revolution): | 5/16 in |
| Pilot Type: | Standard Pilot |
Product Details
| Shaft Length | 76.0 LB |
| Shaft End Pressure [Max | Flange Mount |
| Model No. | Right Hand (CW) |
| Pressure Port Size, Shaft End | 3525V25A17-1AC22R |
| Rotation | 3 |
| Major Diameter [Min | Flange |
| Displacement Shaft End (cu in/revolution) | 5/16 in |
| Pilot Type | Standard Pilot |
| Pump Series | 1.25 in |
| Shaft Seal Type | Straight w/ Key |
| Shaft Key | 3525V |
| Shaft End Flow @ RPM | 2 7/8 in |
| Spline Description | Buna-N |
| Max. RPM [Max | 1800 |
| Port Orientation - Cover End | N/A |
| Shaft End RPM [Max | SAE C, 2 Bolt |
| Cover End Flow @ RPM | Single Shaft Seal |
| Integral Valve Configuration | N/A |
| Minor Diameter [Min | 1800 |
| Mounting | 1800 |
| Major Diameter [Max | N/A |
| Mounting Flange | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Weight | N/A |
| Controlled Flow Rate | N/A |
| Minor Diameter | N/A |
| Cover End Pressure [Max | N/A |
| Cover End RPM [Max | N/A |
| Displacement Cover End (cu in/revolution) | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
| Shaft Type | 3525V25A17-1AC22R |
| Port Orientation - Shaft End | 2500 |
| Shaft Dia. | 2500 |
| Relief Valve Setting | 25.5 |
| GPM @ 1,800 rpm, Cover End | 37.5 |
| Minor Diameter [Max | N/A |
| Seal Material | Outlet 45° CW from Inlet |
| Manufacturer Part No. | Outlet Opposite Inlet |
| Pressure Port Size, Cover End | 1 in Code 61 |
| Port Size | 1 1/4 in Code 61 |
| Port Type | 3.4 |
| GPM @ 1,800 rpm, Shaft End | 4.9 |