COMMON RAIL 33800-4X800 injector
COMMON RAIL injector FAQ Hydraulic Pump Co., Ltd. offers a 41 mm B COMMON RAIL 33800-4X800 injector selection of Genuine COMMON RAIL injector at Wholesale Prices. We 2.8 Calculation factor Y1 are a COMMON RAIL 33800-4X800 injector Certified Parts Retailer
| Brand Name: | COMMON RAIL |
| Model Number: | 33800-4X800 |
| Port Type: | 76.0 LB |
| Integral Valve Configuration: | Flange Mount |
| Pump Series: | Right Hand (CW) |
| Shaft Length: | 3525VQ21A21-11BB20 |
| Pilot Type: | 3 |
| Major Diameter [Max: | Flange |
| Shaft End Flow @ RPM: | N/A |
| Manufacturer Part No.: | Standard Pilot |
Product Details
| Port Type | 76.0 LB |
| Integral Valve Configuration | Flange Mount |
| Pump Series | Right Hand (CW) |
| Shaft Length | 3525VQ21A21-11BB20 |
| Pilot Type | 3 |
| Major Diameter [Max | Flange |
| Shaft End Flow @ RPM | N/A |
| Manufacturer Part No. | Standard Pilot |
| GPM @ 1,800 rpm, Shaft End | 1.25 in |
| Cover End RPM [Max | 14 Tooth Splined |
| Spline Description | 3525VQ |
| Port Orientation - Cover End | 1 15/16 in |
| Mounting | Buna-N |
| Shaft End Pressure [Max | 2500 |
| Cover End Flow @ RPM | 1.04 in |
| Pressure Port Size, Shaft End | SAE C, 2 Bolt |
| Displacement Shaft End (cu in/revolution) | Single Shaft Seal |
| Shaft Seal Type | 12/24 |
| Pressure Port Size, Cover End | 2500 |
| Minor Diameter [Min | 2500 |
| Model No. | N/A |
| Max. RPM [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | 1.248 in |
| Shaft Key | 1.247 in |
| Minor Diameter [Max | N/A |
| Port Size | N/A |
| Shaft Type | N/A |
| Port Orientation - Shaft End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Relief Valve Setting | 3525VQ21A21-11BB20 |
| Shaft End RPM [Max | 3000 |
| Mounting Flange | 3000 |
| Controlled Flow Rate | 31.5 |
| Rotation | 31.5 |
| Displacement Cover End (cu in/revolution) | w/o Integral Valves |
| Weight | Outlet 45° CCW from Inlet |
| Seal Material | Outlet 90° CCW from Inlet |
| Cover End Pressure [Max | 1 in Flange |
| Major Diameter [Min | 1 1/4 in Flange |
| Shaft Dia. | 4.12 |
| Minor Diameter | 4.12 |