Rexroth M-2SEW6N3X/420MG205N9K4 THROTTLE VALVE
Manufacturers of all Rexroth THROTTLE VALVE are represented in our partial list of clients. FAQ Hydraulic Pump Co., Ltd. Contact Gary for a complete Rexroth M-2SEW6N3X/420MG205N9K4 THROTTLE VALVE 14 mm N1 list of clients and projects. 9.55 kN C
| Brand Name: | Rexroth |
| Model Number: | M-2SEW6N3X/420MG205N9K4 |
| Shaft Length: | 75.0 LB |
| Cover End Flow @ RPM: | Flange Mount |
| Shaft End Pressure [Max: | Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End: | 3520V38A14-86AA22R |
| Shaft Key: | 3 |
| Pump Series: | Flange |
| Cover End Pressure [Max: | 5/16 in |
| Shaft End RPM [Max: | Standard Pilot |
Product Details
| Shaft Length | 75.0 LB |
| Cover End Flow @ RPM | Flange Mount |
| Shaft End Pressure [Max | Right Hand (CW) |
| GPM @ 1,800 rpm, Cover End | 3520V38A14-86AA22R |
| Shaft Key | 3 |
| Pump Series | Flange |
| Cover End Pressure [Max | 5/16 in |
| Shaft End RPM [Max | Standard Pilot |
| Controlled Flow Rate | 1.375 in |
| Manufacturer Part No. | Straight w/ Key |
| Weight | 3520V |
| Mounting | 3.875 in |
| Integral Valve Configuration | Buna-N |
| Port Type | 1800 |
| Minor Diameter [Min | N/A |
| Shaft Seal Type | SAE C, 2 Bolt |
| Seal Material | Single Shaft Seal |
| Shaft Type | N/A |
| Max. RPM [Max | 1800 |
| Spline Description | 1800 |
| Relief Valve Setting | N/A |
| Port Orientation - Shaft End | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Pressure Port Size, Cover End | N/A |
| Major Diameter [Max | N/A |
| Model No. | N/A |
| Cover End RPM [Max | N/A |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Displacement Cover End (cu in/revolution) | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Rotation | 3520V38A14-86AA22R |
| Port Orientation - Cover End | 3000 |
| Port Size | 2500 |
| Minor Diameter [Max | 21 |
| Shaft End Flow @ RPM | 57 |
| Pressure Port Size, Shaft End | N/A |
| Displacement Shaft End (cu in/revolution) | Outlet 135° CCW from Inlet |
| Mounting Flange | Outlet Opposite Inlet |
| Pilot Type | 3/4 in Code 61 |
| Major Diameter [Min | 1 1/4 in Code 61 |
| Minor Diameter | 2.8 |
| Shaft Dia. | 7.4 |