Rexroth HED4OP THROTTLE VALVE
Find the discount Rexroth HED4OP THROTTLE VALVE online you need . We offer ... If you check out our large selection 0.32 e of 6,400 rpm Nlim (oil) Rexroth HED4OP THROTTLE VALVE once FAQ Hydraulic Pump Co., Ltd. .
| Brand Name: | Rexroth |
| Model Number: | HED4OP |
| Weight: | 45.0 LB |
| Max. RPM [Max: | Flange Mount |
| Cover End RPM [Max: | Right Hand (CW) |
| Shaft Length: | 2520V21A14-11CB22R |
| GPM @ 1,800 rpm, Shaft End: | 2 1/2 |
| Manufacturer Part No.: | Flange |
| Major Diameter [Min: | N/A |
| Port Orientation - Shaft End: | Standard Pilot |
Product Details
| Weight | 45.0 LB |
| Max. RPM [Max | Flange Mount |
| Cover End RPM [Max | Right Hand (CW) |
| Shaft Length | 2520V21A14-11CB22R |
| GPM @ 1,800 rpm, Shaft End | 2 1/2 |
| Manufacturer Part No. | Flange |
| Major Diameter [Min | N/A |
| Port Orientation - Shaft End | Standard Pilot |
| Displacement Cover End (cu in/revolution) | 1.09 in |
| Shaft End RPM [Max | 13 Tooth Splined |
| Port Size | 2520V |
| Relief Valve Setting | 1 3/4 in |
| Shaft Key | Buna-N |
| Pilot Type | 1800 |
| Minor Diameter | 0.7285 in |
| Model No. | SAE B, 2 Bolt |
| Shaft Dia. | Single Shaft Seal |
| Shaft Type | 16/32 |
| Pressure Port Size, Cover End | 1800 |
| Mounting Flange | 1800 |
| Controlled Flow Rate | N/A |
| Port Orientation - Cover End | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Major Diameter [Max | 0.873 in |
| Mounting | 0.872 in |
| Pressure Port Size, Shaft End | 0.734 in |
| Shaft End Pressure [Max | 0.723 in |
| Port Type | N/A |
| Cover End Flow @ RPM | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Minor Diameter [Min | 2520V21A14-11CB22R |
| Minor Diameter [Max | 3000 |
| Rotation | 2500 |
| Integral Valve Configuration | 21 |
| Shaft Seal Type | 31.5 |
| Displacement Shaft End (cu in/revolution) | N/A |
| Shaft End Flow @ RPM | Outlet 45° CCW from Inlet |
| Cover End Pressure [Max | Outlet Inline w/Inlet |
| GPM @ 1,800 rpm, Cover End | 3/4 in Code 61 |
| Pump Series | 1 in Code 61 |
| Seal Material | 2.8 |
| Spline Description | 4.1 |