Rexroth A10VSO71DG/31R-PPA12N00 Piston Pump
Rexroth A10VSO71DG/31R-PPA12N00 Piston Pump Needs None Flinger Material Analysis , Setscrew Bearing Locking Device Rexroth Piston Pump Manufacturing Service FAQ Hydraulic Pump Co., Ltd. . Get Your Free.
| Brand Name: | Rexroth |
| Model Number: | A10VSO71DG/31R-PPA12N00 |
| Cover End RPM [Max: | 45.0 LB |
| Major Diameter [Min: | Flange Mount |
| Mounting Flange: | Left Hand (CCW) |
| Cover End Pressure [Max: | 2520VQ21A11-1DD20LH |
| Seal Material: | 2 1/2 |
| Pressure Port Size, Cover End: | Flange |
| Pilot Type: | 3/16 in |
| Displacement Cover End (cu in/revolution): | Standard Pilot |
Product Details
| Cover End RPM [Max | 45.0 LB |
| Major Diameter [Min | Flange Mount |
| Mounting Flange | Left Hand (CCW) |
| Cover End Pressure [Max | 2520VQ21A11-1DD20LH |
| Seal Material | 2 1/2 |
| Pressure Port Size, Cover End | Flange |
| Pilot Type | 3/16 in |
| Displacement Cover End (cu in/revolution) | Standard Pilot |
| Shaft Key | 0.875 in |
| Shaft Seal Type | Straight w/ Key |
| Weight | 2520VQ |
| Pressure Port Size, Shaft End | 1 15/16 in |
| Cover End Flow @ RPM | Buna-N |
| Shaft End RPM [Max | 2500 |
| Pump Series | N/A |
| GPM @ 1,800 rpm, Cover End | SAE B, 2 Bolt |
| Max. RPM [Max | Single Shaft Seal |
| Relief Valve Setting | N/A |
| Spline Description | 2700 |
| GPM @ 1,800 rpm, Shaft End | 2500 |
| Displacement Shaft End (cu in/revolution) | N/A |
| Port Orientation - Shaft End | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Port Size | N/A |
| Minor Diameter | N/A |
| Port Orientation - Cover End | N/A |
| Shaft Dia. | N/A |
| Integral Valve Configuration | N/A |
| Minor Diameter [Min | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Controlled Flow Rate | 2520VQ21A11-1DD20LH |
| Port Type | 3000 |
| Minor Diameter [Max | 3000 |
| Mounting | 16.5 |
| Manufacturer Part No. | 31.5 |
| Shaft Type | w/o Integral Valves |
| Shaft End Flow @ RPM | Outlet 135° CW from Inlet |
| Rotation | Outlet 90° CW from Inlet |
| Shaft Length | 3/4 in Flange |
| Model No. | 1 in Flange |
| Shaft End Pressure [Max | 2.22 |
| Major Diameter [Max | 4.12 |