Rexroth Z2FS22-8-3X/S2 THROTTLE VALVE
Browse Rexroth Z2FS22-8-3X/S2 THROTTLE VALVE Categories in the Manufacturers FAQ Hydraulic Pump Co., Ltd. Online Free. 11.5 Nm Recommended tightening torque for set screw including Rexroth THROTTLE VALVE. 100 °C T max.
| Brand Name: | Rexroth |
| Model Number: | Z2FS22-8-3X/S2 |
| Shaft End Pressure [Max: | 76.0 LB |
| GPM @ 1,800 rpm, Cover End: | Flange Mount |
| Pressure Port Size, Cover End: | Left Hand (CCW) |
| Cover End Flow @ RPM: | 3525VQ30A12-11CC20-LH |
| Port Orientation - Shaft End: | 3 |
| Relief Valve Setting: | Flange |
| Mounting Flange: | N/A |
| Shaft Seal Type: | Standard Pilot |
Product Details
| Shaft End Pressure [Max | 76.0 LB |
| GPM @ 1,800 rpm, Cover End | Flange Mount |
| Pressure Port Size, Cover End | Left Hand (CCW) |
| Cover End Flow @ RPM | 3525VQ30A12-11CC20-LH |
| Port Orientation - Shaft End | 3 |
| Relief Valve Setting | Flange |
| Mounting Flange | N/A |
| Shaft Seal Type | Standard Pilot |
| Minor Diameter [Min | 1.25 in |
| Max. RPM [Max | 14 Tooth Splined |
| Minor Diameter | 3525VQ |
| Minor Diameter [Max | 1 15/16 in |
| Displacement Shaft End (cu in/revolution) | Buna-N |
| Port Size | 2500 |
| Pump Series | 1.04 in |
| Manufacturer Part No. | SAE C, 2 Bolt |
| Port Orientation - Cover End | Single Shaft Seal |
| Rotation | 12/24 |
| GPM @ 1,800 rpm, Shaft End | 2500 |
| Seal Material | 2500 |
| Pressure Port Size, Shaft End | N/A |
| Integral Valve Configuration | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM | 1.248 in |
| Shaft Length | 1.247 in |
| Controlled Flow Rate | N/A |
| Mounting | N/A |
| Model No. | N/A |
| Shaft Dia. | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Major Diameter [Min | 3525VQ30A12-11CC20-LH |
| Major Diameter [Max | 3000 |
| Cover End Pressure [Max | 3000 |
| Pilot Type | 18 |
| Cover End RPM [Max | 45 |
| Port Type | w/o Integral Valves |
| Weight | Outlet 45° CW from Inlet |
| Displacement Cover End (cu in/revolution) | Outlet Inline w/Inlet |
| Shaft End RPM [Max | 1 in Flange |
| Spline Description | 1 1/4 in Flange |
| Shaft Type | 2.45 |
| Shaft Key | 5.96 |