Yuken PV2R1-6-F-RAA-40 single Vane pump
QuestionYuken PV2R1-6-F-RAA-40 single Vane pump ? Find 25 mm D what you need faster Lead Free additional details: by entering your Yuken single Vane pump FAQ Hydraulic Pump Co., Ltd. information OILES 500SP1 SL1 Hig bearing material: .
| Brand Name: | Yuken |
| Model Number: | PV2R1-6-F-RAA-40 |
| Weight: | 45.0 LB |
| Major Diameter [Min: | Flange Mount |
| Pressure Port Size, Shaft End: | Right Hand (CW) |
| Mounting: | 2520V17A8-11DD22R |
| Cover End Flow @ RPM: | 2 1/2 |
| Shaft Seal Type: | Flange |
| Pump Series: | N/A |
| Minor Diameter [Min: | Standard Pilot |
Product Details
| Weight | 45.0 LB |
| Major Diameter [Min | Flange Mount |
| Pressure Port Size, Shaft End | Right Hand (CW) |
| Mounting | 2520V17A8-11DD22R |
| Cover End Flow @ RPM | 2 1/2 |
| Shaft Seal Type | Flange |
| Pump Series | N/A |
| Minor Diameter [Min | Standard Pilot |
| Port Size | 1.09 in |
| Port Type | 13 Tooth Splined |
| Pilot Type | 2520V |
| Cover End RPM [Max | 1.75 in |
| Port Orientation - Cover End | Buna-N |
| Max. RPM [Max | 1800 |
| Pressure Port Size, Cover End | 0.7285 in |
| Shaft Type | SAE B, 2 Bolt |
| GPM @ 1,800 rpm, Shaft End | Single Shaft Seal |
| Shaft End Pressure [Max | 16/32 |
| Shaft End Flow @ RPM | 1800 |
| Displacement Cover End (cu in/revolution) | 1800 |
| Shaft Length | N/A |
| GPM @ 1,800 rpm, Cover End | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 0.873 in |
| Integral Valve Configuration | 0.872 in |
| Mounting Flange | 0.734 in |
| Spline Description | 0.723 in |
| Model No. | N/A |
| Relief Valve Setting | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Minor Diameter | 2520V17A8-11DD22R |
| Shaft Dia. | 3000 |
| Minor Diameter [Max | 2500 |
| Seal Material | 12 |
| Shaft End RPM [Max | 25.5 |
| Major Diameter [Max | N/A |
| Port Orientation - Shaft End | Outlet 135° CW from Inlet |
| Manufacturer Part No. | Outlet 90° CW from Inlet |
| Cover End Pressure [Max | 3/4 in Code 61 |
| Controlled Flow Rate | 1 in Code 61 |
| Shaft Key | 1.7 |
| Rotation | 3.4 |