Rexroth ZDB10VP2-4X/315 PRESSURE RELIEF VALVE
Find the discount Rexroth ZDB10VP2-4X/315 PRESSURE RELIEF VALVE online you need . Bearings with Housin Type We offer ... If you check out our large 678 Bearing Part Number selection of Rexroth ZDB10VP2-4X/315 PRESSURE RELIEF VALVE once FAQ Hydraulic Pump Co., Ltd. . 6 Width T(mm)
| Brand Name: | Rexroth |
| Model Number: | ZDB10VP2-4X/315 |
| Shaft End Flow @ RPM: | 30.0 LB |
| Integral Valve Configuration: | Flange Mount |
| Seal Material: | Right Hand (CW) |
| Mounting: | V2010-1F11S1S-11CC12 |
| Relief Valve Setting: | 1 1/2 |
| Pressure Port Size, Shaft End: | Flange |
| Manufacturer Part No.: | N/A |
| Shaft Type: | N/A |
Product Details
| Shaft End Flow @ RPM | 30.0 LB |
| Integral Valve Configuration | Flange Mount |
| Seal Material | Right Hand (CW) |
| Mounting | V2010-1F11S1S-11CC12 |
| Relief Valve Setting | 1 1/2 |
| Pressure Port Size, Shaft End | Flange |
| Manufacturer Part No. | N/A |
| Shaft Type | N/A |
| Cover End RPM [Max | 0.875 in |
| GPM @ 1,800 rpm, Shaft End | 13 Tooth Splined |
| Port Orientation - Cover End | V2010 |
| Shaft Key | 1.3125 in |
| Shaft Length | Buna-N |
| Pressure Port Size, Cover End | 2500 |
| Pilot Type | 0.728 in |
| Weight | SAE B, 2 Bolt |
| Port Orientation - Shaft End | Single Shaft Seal |
| Controlled Flow Rate | 16/32 |
| Major Diameter [Min | 3000 |
| Port Type | 2500 |
| Shaft End Pressure [Max | N/A |
| Cover End Flow @ RPM | 1 gal/min @ 1200 rpm, 1.5 gal/min @ 1800 rpm |
| Max. RPM [Max | 0.873 in |
| GPM @ 1,800 rpm, Cover End | 0.872 in |
| Port Size | 0.7335 in |
| Minor Diameter [Min | 0.7225 in |
| Spline Description | N/A |
| Cover End Pressure [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Shaft Dia. | V2010-1F11S1S-11CC12 |
| Rotation | 2500 |
| Major Diameter [Max | 2500 |
| Mounting Flange | 1.5 |
| Pump Series | 16.5 |
| Displacement Shaft End (cu in/revolution) | N/A |
| Shaft Seal Type | Outlet 45° CW from Inlet |
| Shaft End RPM [Max | Outlet Inline w/Inlet |
| Displacement Cover End (cu in/revolution) | 1/2 in SAE O-Ring |
| Model No. | 3/4 in SAE O-Ring |
| Minor Diameter [Max | 0.2 |
| Minor Diameter | 2.22 |