Danfoss Shut-off valves 148B4612 STC 65 A ANG SHUT-OFF VALVE CAP
The ABEC 1 (ISO Cla precision rating: online Danfoss Shut-off valves 148B4612 STC 65 A ANG SHUT-OFF VALVE CAP parts store gives you immediate access 0.551 Inch | 14 Mill B to a FAQ Hydraulic Pump Co., Ltd. selection of more than 1.4 million new, used, remanufactured.
| Brand Name: |
Danfoss Shut-off valves |
| Model Number: |
148B4612 STC 65 A |
| Seal Material: |
45.0 LB |
| Integral Valve Configuration: |
Flange Mount |
| Shaft Length: |
Left Hand (CCW) |
| Cover End Pressure [Max: |
2520VQ12A5-11BC20LH |
| Mounting Flange: |
2 1/2 |
| Pilot Type: |
Flange |
| Minor Diameter: |
N/A |
| Shaft Type: |
Standard Pilot |
Product Details
| Seal Material |
45.0 LB |
| Integral Valve Configuration |
Flange Mount |
| Shaft Length |
Left Hand (CCW) |
| Cover End Pressure [Max |
2520VQ12A5-11BC20LH |
| Mounting Flange |
2 1/2 |
| Pilot Type |
Flange |
| Minor Diameter |
N/A |
| Shaft Type |
Standard Pilot |
| Shaft End Flow @ RPM |
0.875 in |
| Controlled Flow Rate |
13 Tooth Splined |
| Cover End RPM [Max |
2520VQ |
| Shaft Dia. |
1 3/8 in |
| Pressure Port Size, Shaft End |
Buna-N |
| Shaft End Pressure [Max |
2700 |
| Manufacturer Part No. |
0.715 in |
| Shaft End RPM [Max |
SAE B, 2 Bolt |
| Major Diameter [Min |
Single Shaft Seal |
| Pump Series |
16/32 |
| Rotation |
2700 |
| Displacement Cover End (cu in/revolution) |
2700 |
| Major Diameter [Max |
N/A |
| Shaft Seal Type |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Minor Diameter [Min |
0.873 in |
| Port Type |
0.872 in |
| Pressure Port Size, Cover End |
N/A |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Minor Diameter [Max |
N/A |
| Weight |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Port Orientation - Cover End |
2520VQ12A5-11BC20LH |
| Spline Description |
3000 |
| Max. RPM [Max |
3000 |
| Model No. |
7.5 |
| Port Size |
18 |
| Shaft Key |
w/o Integral Valves |
| Mounting |
Outlet 45° CW from Inlet |
| Relief Valve Setting |
Outlet 90° CCW from Inlet |
| Displacement Shaft End (cu in/revolution) |
3/4 in Flange |
| GPM @ 1,800 rpm, Shaft End |
1 in Flange |
| Cover End Flow @ RPM |
1.1 |
| Port Orientation - Shaft End |
2.45 |