Rexroth Z2FS10-5-3X/S2V THROTTLE VALVE
Rexroth THROTTLE VALVE offers a Rexroth Z2FS10-5-3X/S2V THROTTLE VALVE selection of Genuine 466 mm Da max Rexroth THROTTLE VALVE at Wholesale Prices. FAQ Hydraulic Pump Co., Ltd. We 14.47 Hz Characteristic rolling element frequency, BSF are a Rexroth Z2FS10-5-3X/S2V THROTTLE VALVE Certified Parts Retailer
What is Z2FS10-5-3X/S2V bearing interchange？
| Brand Name: |
Rexroth |
| Model Number: |
Z2FS10-5-3X/S2V |
| Cover End Flow @ RPM: |
76.0 LB |
| Minor Diameter [Max: |
Flange Mount |
| Mounting Flange: |
Right Hand (CW) |
| Seal Material: |
3525VQ38A12-1AA20 |
| Minor Diameter: |
3 |
| Rotation: |
Flange |
| Port Type: |
5/16 in |
| Major Diameter [Min: |
Standard Pilot |
Product Details
| Cover End Flow @ RPM |
76.0 LB |
| Minor Diameter [Max |
Flange Mount |
| Mounting Flange |
Right Hand (CW) |
| Seal Material |
3525VQ38A12-1AA20 |
| Minor Diameter |
3 |
| Rotation |
Flange |
| Port Type |
5/16 in |
| Major Diameter [Min |
Standard Pilot |
| Shaft End Pressure [Max |
1.25 in |
| GPM @ 1,800 rpm, Cover End |
Straight w/ Key |
| Shaft End Flow @ RPM |
3525VQ |
| Relief Valve Setting |
2 1/2 in |
| Shaft End RPM [Max |
Double |
| Minor Diameter [Min |
Buna-N |
| Controlled Flow Rate |
2400 |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| Shaft Key |
SAE C, 2 Bolt |
| Port Orientation - Shaft End |
Single Shaft Seal |
| Pressure Port Size, Shaft End |
N/A |
| Shaft Seal Type |
2500 |
| Manufacturer Part No. |
2400 |
| Weight |
N/A |
| Cover End RPM [Max |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Shaft Type |
N/A |
| Shaft Length |
N/A |
| Integral Valve Configuration |
N/A |
| Max. RPM [Max |
N/A |
| Port Size |
N/A |
| Pressure Port Size, Cover End |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Model No. |
3525VQ38A12-1AA20 |
| Major Diameter [Max |
3000 |
| Pump Series |
3000 |
| Spline Description |
18 |
| Cover End Pressure [Max |
57 |
| Mounting |
w/o Integral Valves |
| Pilot Type |
Outlet 135° CCW from Inlet |
| Shaft Dia. |
Outlet Opposite Inlet |
| GPM @ 1,800 rpm, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
1 1/4 in Flange |
| Port Orientation - Cover End |
2.5 |