Danfoss Shut-off valves 148B4665 STC 150 M ANG SHUT-OFF VALVE HANDWHEEL
With over 10170 full-service stores, our Danfoss Shut-off valves 148B4665 STC 150 M ANG SHUT-OFF VALVE HANDWHEEL inventory is extensive and our parts are priced right. FAQ Hydraulic Pump Co., Ltd. within 24 hours. 22219 Insert Part Number This helps you maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: |
Danfoss Shut-off valves |
| Model Number: |
148B4665 STC 150 M |
| Shaft Seal Type: |
45.0 LB |
| Port Orientation - Shaft End: |
Flange Mount |
| Relief Valve Setting: |
Left Hand (CCW) |
| Spline Description: |
2520VQ21A11-11DD20-LH |
| Shaft End Pressure [Max: |
2 1/2 |
| Cover End RPM [Max: |
Flange |
| GPM @ 1,800 rpm, Cover End: |
N/A |
| Weight: |
Standard Pilot |
Product Details
| Shaft Seal Type |
45.0 LB |
| Port Orientation - Shaft End |
Flange Mount |
| Relief Valve Setting |
Left Hand (CCW) |
| Spline Description |
2520VQ21A11-11DD20-LH |
| Shaft End Pressure [Max |
2 1/2 |
| Cover End RPM [Max |
Flange |
| GPM @ 1,800 rpm, Cover End |
N/A |
| Weight |
Standard Pilot |
| Minor Diameter |
0.875 in |
| Shaft Key |
13 Tooth Splined |
| Port Type |
2520VQ |
| Major Diameter [Min |
1.375 in |
| Port Orientation - Cover End |
Buna-N |
| Pressure Port Size, Cover End |
2500 |
| Shaft Length |
0.715 in |
| Seal Material |
SAE B, 2 Bolt |
| Cover End Pressure [Max |
Single Shaft Seal |
| Integral Valve Configuration |
16/32 |
| Shaft Dia. |
2700 |
| Shaft End RPM [Max |
2500 |
| Manufacturer Part No. |
N/A |
| Major Diameter [Max |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Cover End Flow @ RPM |
0.873 in |
| Port Size |
0.872 in |
| Max. RPM [Max |
N/A |
| Minor Diameter [Max |
N/A |
| Minor Diameter [Min |
N/A |
| Model No. |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) |
2520VQ21A11-11DD20-LH |
| Mounting Flange |
3000 |
| GPM @ 1,800 rpm, Shaft End |
3000 |
| Controlled Flow Rate |
16.5 |
| Rotation |
31.5 |
| Mounting |
w/o Integral Valves |
| Displacement Cover End (cu in/revolution) |
Outlet 135° CW from Inlet |
| Shaft End Flow @ RPM |
Outlet 90° CW from Inlet |
| Pressure Port Size, Shaft End |
3/4 in Flange |
| Pump Series |
1 in Flange |
| Shaft Type |
2.22 |
| Pilot Type |
4.12 |