Hydraulic Denison Vane Pumps 28Mpa Max Pressure For Engineering Machinery
| Major Diameter [Max: |
76.0 LB |
| Mounting Flange: |
Flange Mount |
| Controlled Flow Rate: |
Left Hand (CCW) |
| Max. RPM [Max: |
3525VQ30A21-11DC20-LH |
| Weight: |
3 |
| Minor Diameter [Min: |
Flange |
| Pump Series: |
N/A |
| Shaft Type: |
Standard Pilot |
| PDF |
|
Product Details
| Major Diameter [Max |
76.0 LB |
| Mounting Flange |
Flange Mount |
| Controlled Flow Rate |
Left Hand (CCW) |
| Max. RPM [Max |
3525VQ30A21-11DC20-LH |
| Weight |
3 |
| Minor Diameter [Min |
Flange |
| Pump Series |
N/A |
| Shaft Type |
Standard Pilot |
| Cover End Pressure [Max |
1.25 in |
| Displacement Cover End (cu in/revolution) |
14 Tooth Splined |
| GPM @ 1,800 rpm, Cover End |
3525VQ |
| Shaft Length |
1.9375 in |
| Shaft Key |
Double |
| Seal Material |
Buna-N |
| Port Orientation - Cover End |
2500 |
| GPM @ 1,800 rpm, Shaft End |
1.04 in |
| Shaft Seal Type |
SAE C, 2 Bolt |
| Pressure Port Size, Shaft End |
Single Shaft Seal |
| Integral Valve Configuration |
12/24 |
| Manufacturer Part No. |
2500 |
| Port Size |
2500 |
| Displacement Shaft End (cu in/revolution) |
6 |
| Major Diameter [Min |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Shaft End Flow @ RPM |
1.248 in |
| Spline Description |
1.247 in |
| Shaft End RPM [Max |
N/A |
| Minor Diameter [Max |
N/A |
| Relief Valve Setting |
N/A |
| Mounting |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Model No. |
3525VQ30A21-11DC20-LH |
| Port Type |
3000 |
| Minor Diameter |
3000 |
| Cover End Flow @ RPM |
31.5 |
| Port Orientation - Shaft End |
45 |
| Pilot Type |
w/o Integral Valves |
| Pressure Port Size, Cover End |
Outlet 45° CW from Inlet |
| Shaft Dia. |
Outlet 90° CW from Inlet |
| Cover End RPM [Max |
1 in Flange |
| Shaft End Pressure [Max |
1 1/4 in Flange |
| Rotation |
4.1 |