QT Series Hydraulic Gear Pump For Forging Machinery And Elevators
Cover End RPM [Max: | 75.0 LB |
Pilot Type: | Flange Mount |
Controlled Flow Rate: | Right Hand (CW) |
Displacement Cover End (cu in/revolution): | 3520VQ30A11-1CC20 |
Cover End Pressure [Max: | 3 |
GPM @ 1,800 rpm, Shaft End: | Flange |
Relief Valve Setting: | 5/16 in |
Pressure Port Size, Shaft End: | Standard Pilot |
PDF |
|
Product Details
Cover End RPM [Max | 75.0 LB |
Pilot Type | Flange Mount |
Controlled Flow Rate | Right Hand (CW) |
Displacement Cover End (cu in/revolution) | 3520VQ30A11-1CC20 |
Cover End Pressure [Max | 3 |
GPM @ 1,800 rpm, Shaft End | Flange |
Relief Valve Setting | 5/16 in |
Pressure Port Size, Shaft End | Standard Pilot |
Shaft End RPM [Max | 1.25 in |
Mounting Flange | Straight w/ Key |
Shaft Length | 3520VQ |
Max. RPM [Max | 2 1/2 in |
Shaft Seal Type | Double |
Pump Series | Buna-N |
Spline Description | 2500 |
Shaft End Pressure [Max | N/A |
Shaft End Flow @ RPM | SAE C, 2 Bolt |
Weight | Single Shaft Seal |
Port Type | N/A |
Pressure Port Size, Cover End | 2500 |
Minor Diameter [Max | 2500 |
Minor Diameter [Min | N/A |
Displacement Shaft End (cu in/revolution) | 6 |
Manufacturer Part No. | N/A |
Major Diameter [Min | N/A |
Mounting | N/A |
Port Size | N/A |
Rotation | N/A |
Model No. | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Integral Valve Configuration | 3520VQ30A11-1CC20 |
Port Orientation - Cover End | 3000 |
Seal Material | 3000 |
Minor Diameter | 16.5 |
Major Diameter [Max | 45 |
Shaft Type | w/o Integral Valves |
Port Orientation - Shaft End | Outlet 45° CW from Inlet |
Cover End Flow @ RPM | Outlet Inline w/Inlet |
Shaft Dia. | 3/4 in Flange |
GPM @ 1,800 rpm, Cover End | 1 1/4 in Flange |
Shaft Key | 2.2 |