Sumitomo Internal Hydraulic Gear Pump Low Noise Performance For Servo System
Controlled Flow Rate: | 45.0 LB |
Spline Description: | Flange Mount |
Rotation: | Right Hand (CW) |
Shaft Type: | 2520VQ21A11-11DD20 |
Pilot Type: | 2 1/2 |
GPM @ 1,800 rpm, Shaft End: | Flange |
Pump Series: | N/A |
Manufacturer Part No.: | Standard Pilot |
PDF |
|
Product Details
Controlled Flow Rate | 45.0 LB |
Spline Description | Flange Mount |
Rotation | Right Hand (CW) |
Shaft Type | 2520VQ21A11-11DD20 |
Pilot Type | 2 1/2 |
GPM @ 1,800 rpm, Shaft End | Flange |
Pump Series | N/A |
Manufacturer Part No. | Standard Pilot |
Major Diameter [Max | 0.875 in |
Cover End RPM [Max | 13 Tooth Splined |
Shaft Seal Type | 2520VQ |
Shaft End Flow @ RPM | 1.375 in |
Minor Diameter [Min | Buna-N |
Weight | 2500 |
Major Diameter [Min | 0.715 in |
Port Orientation - Cover End | SAE B, 2 Bolt |
Minor Diameter [Max | Single Shaft Seal |
Shaft Dia. | 16/32 |
GPM @ 1,800 rpm, Cover End | 2700 |
Displacement Cover End (cu in/revolution) | 2500 |
Shaft End RPM [Max | N/A |
Port Type | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Shaft Key | 0.873 in |
Cover End Pressure [Max | 0.872 in |
Cover End Flow @ RPM | N/A |
Pressure Port Size, Shaft End | N/A |
Port Orientation - Shaft End | N/A |
Shaft Length | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Max. RPM [Max | 2520VQ21A11-11DD20 |
Minor Diameter | 3000 |
Port Size | 3000 |
Relief Valve Setting | 16.5 |
Mounting Flange | 31.5 |
Shaft End Pressure [Max | w/o Integral Valves |
Mounting | Outlet 135° CW from Inlet |
Seal Material | Outlet 90° CW from Inlet |
Displacement Shaft End (cu in/revolution) | 3/4 in Flange |
Model No. | 1 in Flange |
Pressure Port Size, Cover End | 2.22 |
Integral Valve Configuration | 4.12 |