Cross reference Rexroth R901085403 PVV54-1X/139-098RB15DDMC Vane pump | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| No. | Brand | J | C | a | D | G | B | T | F |
| 07098/07196 | Loyal | - | 27 kN | 2,8 mm | 50,005 mm | - | 14,26 mm | 13,495 mm | - |
| 07098/07196-B | Timken | - | 9,525 mm | - | 50,005 mm | - | 14,26 mm | - | - |
| 07098/07196D+X1S-07097 | Timken | - | 25,4 mm | - | 50,005 mm | - | - | 33,34 mm | - |
| 07098/07204 | NACHI | - | 26000 kN | 2.9 mm | 51.994 mm | - | 14.260 mm | 15.011 mm | - |
| 07098/07204-B | Timken | - | 12,7 mm | - | 51,994 mm | - | 14,26 mm | - | - |
| 07098/07205 | NSK | - | 26 kN | 12,1 mm | 52,001 mm | - | 14,26 mm | 15,011 mm | - |
| 2B-DE0989LLCS28/L260 | NTN | - | 41 kN | - | 83 mm | - | 45 mm | - | - |
| T139 | Fersa | - | - | - | 58,738 mm | - | - | - | - |
| T139W | Timken | - | - | - | 58,738 mm | - | - | 15,875 mm | - |
| 110053X/110098X | Gamet | - | 21,25 mm | - | 98,425 mm | - | 29,5 mm | 26,75 mm | 5,5 mm |
| 110053X/110098XC | Gamet | 102,93 mm | 21,25 mm | - | 98,425 mm | 10 mm | 29,5 mm | 26,75 mm | 5,5 mm |
| Rexroth R901085385 PVV41-1X/113-018RB15DDMC Vane pump | Pressure Port Size, Cover End:30.0 LB; Pump Series:Flange Mount; Shaft Seal Type:Right Hand (CW); Shaft End Pressure [Max:V2010-1F12S2S-11DD12; Port Orientation - Shaft End:1 1/2; Spline Description:Flange; Controlled Flow Rate:N/A; Mounting Flange:N/A; Shaft Key:0.875 in; Shaft End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S2S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
| Rexroth R901085381 PVV21-1X/068-018RB15DDMB Vane pump | Port Size:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Shaft Dia.:Right Hand (CW); Minor Diameter [Max:V2010-1F12S2S-11DD12; Weight:1 1/2; Integral Valve Configuration:Flange; Shaft End Flow @ RPM:N/A; Pilot Type:N/A; Relief Valve Setting:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S2S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
| Rexroth R901083429 PVV54-1X/139-113LB15DDMC Vane pump | Weight:30.0 LB; Port Orientation - Shaft End:Flange Mount; Port Size:Right Hand (CW); Manufacturer Part No.:V2010-1F12S2S-11DD12; Shaft Type:1 1/2; Shaft End Flow @ RPM:Flange; Rotation:N/A; Shaft End Pressure [Max:N/A; Shaft Seal Type:0.875 in; Shaft Key:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S2S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
| Rexroth R901085390 PVV42-1X/082-045RB15DDMC Vane pump | Pilot Type:30.0 LB; Pressure Port Size, Cover End:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Shaft Seal Type:V2010-1F12S2S-11DD12; Shaft Key:1 1/2; Mounting:Flange; Integral Valve Configuration:N/A; Seal Material:N/A; Port Size:0.875 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S2S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
| Rexroth R901084887 PVV52-1X/193-045RA15DDMC Vane pump | Seal Material:30.0 LB; Major Diameter [Min:Flange Mount; Mounting:Right Hand (CW); Port Size:V2010-1F12S2S-11DD12; Cover End Pressure [Max:1 1/2; Minor Diameter [Min:Flange; Pilot Type:N/A; Pressure Port Size, Cover End:N/A; Pressure Port Size, Shaft End:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S2S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
| Rexroth R901085387 PVV42-1X/098-040RB15DDMC Vane pump | GPM @ 1,800 rpm, Shaft End:30.0 LB; Major Diameter [Min:Flange Mount; Port Size:Right Hand (CW); Mounting Flange:V2010-1F12S2S-11DD12; Minor Diameter [Min:1 1/2; Controlled Flow Rate:Flange; Major Diameter [Max:N/A; Port Orientation - Shaft End:N/A; Mounting:0.875 in; Shaft Length:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S2S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
| Rexroth R901085383 PVV41-1X/122-027RB15DDMC Vane pump | Port Orientation - Cover End:30.0 LB; Cover End Flow @ RPM:Flange Mount; Manufacturer Part No.:Right Hand (CW); Mounting:V2010-1F12S2S-11DD12; GPM @ 1,800 rpm, Cover End:1 1/2; Minor Diameter [Max:Flange; Pressure Port Size, Cover End:N/A; Rotation:N/A; Shaft End Flow @ RPM:0.875 in; Major Diameter [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S2S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
| Rexroth R901085379 PVV21-1X/055-027RB15DDMB Vane pump | Shaft Length:30.0 LB; Pilot Type:Flange Mount; Relief Valve Setting:Right Hand (CW); Shaft End RPM [Max:V2010-1F12S2S-11DD12; Minor Diameter [Max:1 1/2; Shaft Dia.:Flange; Cover End Flow @ RPM:N/A; Weight:N/A; Max. RPM [Max:0.875 in; Spline Description:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2400; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2400; Controlled Flow Rate:N/A; Cover End Flow @ RPM:2 gal/min @ 1200 rpm, 3 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F12S2S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2200; GPM @ 1,800 rpm, Cover End:3; GPM @ 1,800 rpm, Shaft End:18; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.4; Displacement Shaft End (cu in/revolution):2.38; |
Vane Pumps | Bosch Rexroth USA
Bosch vane pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance, and
Vane pumps | Bosch Rexroth AG
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Variable vane pumps, direct controlled | Bosch Rexroth AG
Hydraulic pumps of type PV7...A are direct operated vane pumps with adjustable displacement. For limitation of the maximum flow, the pump is equipped with a
Fixed displacement vane pumps | Bosch Rexroth AG
Hydraulic pumps of type PVQ are vane pumps with constant displacement in mobile version
Vane pumps | Bosch Rexroth USA
Vane pumps are available in a wider range of sizes. They are used in applications requiring medium operating pressures and low noise emissions
Rexroth R901085403 PVV54-1X/139-098RB15DDMC Vane pump Video