BOSCH 0432231703 injector
With over 10170 full-service FAQ Hydraulic Pump Co., Ltd. stores, our BOSCH 0432231703 injector inventory is extensive and our parts M06110 Product Group are priced right. within 24 hours. This helps you maximize your 8483.20.40.40 Harmonized Tariff Code productivity by saving time and your hard-earned dollars.
| Brand Name: | BOSCH |
| Model Number: | 0432231703 |
| Mounting: | 76.0 LB |
| Pilot Type: | Flange Mount |
| Shaft Key: | Right Hand (CW) |
| Controlled Flow Rate: | 3525VQ35A21-11DD20 |
| Integral Valve Configuration: | 3 |
| Rotation: | Flange |
| Minor Diameter [Max: | N/A |
| Major Diameter [Max: | Standard Pilot |
Product Details
| Mounting | 76.0 LB |
| Pilot Type | Flange Mount |
| Shaft Key | Right Hand (CW) |
| Controlled Flow Rate | 3525VQ35A21-11DD20 |
| Integral Valve Configuration | 3 |
| Rotation | Flange |
| Minor Diameter [Max | N/A |
| Major Diameter [Max | Standard Pilot |
| Cover End RPM [Max | 1.25 in |
| Model No. | 14 Tooth Splined |
| Manufacturer Part No. | 3525VQ |
| Displacement Shaft End (cu in/revolution) | 1.9375 in |
| Shaft End Pressure [Max | Buna-N |
| Cover End Flow @ RPM | 2400 |
| Port Orientation - Cover End | 1.04 in |
| Port Size | SAE C, 2 Bolt |
| Max. RPM [Max | Single Shaft Seal |
| Port Type | 12/24 |
| Major Diameter [Min | 2500 |
| Spline Description | 2400 |
| Pressure Port Size, Shaft End | N/A |
| GPM @ 1,800 rpm, Cover End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | 1.248 in |
| Shaft Seal Type | 1.247 in |
| Shaft Type | N/A |
| Port Orientation - Shaft End | N/A |
| Pump Series | N/A |
| Relief Valve Setting | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Shaft End RPM [Max | 3525VQ35A21-11DD20 |
| Cover End Pressure [Max | 3000 |
| Weight | 3000 |
| Shaft Length | 31.5 |
| Mounting Flange | 52.5 |
| Pressure Port Size, Cover End | w/o Integral Valves |
| Seal Material | Outlet 135° CW from Inlet |
| GPM @ 1,800 rpm, Shaft End | Outlet 90° CW from Inlet |
| Minor Diameter [Min | 1 in Flange |
| Shaft End Flow @ RPM | 1 1/4 in Flange |
| Minor Diameter | 4.12 |
| Shaft Dia. | 6.88 |