Yuken DSG-01 pressure valve
With over 10170 7.8 kN Basic static load rating C0 full-service stores, our Yuken DSG-01 pressure valve inventory 1/4-28 UNF Grub (set) screw G2 is extensive and our parts are priced right. 25.4 mm d within 24 hours. This helps you FAQ Hydraulic Pump Co., Ltd. maximize your productivity by saving time and your hard-earned dollars.
| Brand Name: | Yuken |
| Model Number: | DSG-01 |
| Max. RPM [Max: | 35.0 LB |
| Shaft End Pressure [Max: | Flange Mount |
| Minor Diameter [Max: | Left Hand (CCW) |
| Cover End Flow @ RPM: | V2020-1F13S11S-1CC30L |
| Weight: | 2 |
| Shaft Length: | Flange |
| Port Orientation - Cover End: | 3/16 in |
| Shaft Seal Type: | N/A |
Product Details
| Max. RPM [Max | 35.0 LB |
| Shaft End Pressure [Max | Flange Mount |
| Minor Diameter [Max | Left Hand (CCW) |
| Cover End Flow @ RPM | V2020-1F13S11S-1CC30L |
| Weight | 2 |
| Shaft Length | Flange |
| Port Orientation - Cover End | 3/16 in |
| Shaft Seal Type | N/A |
| Port Type | 0.875 in |
| Manufacturer Part No. | Straight w/ Key |
| Displacement Cover End (cu in/revolution) | V2020 |
| Shaft Key | 2 5/16 in |
| Shaft Dia. | Double |
| Shaft End RPM [Max | Buna-N |
| Pilot Type | 2400 |
| Minor Diameter [Min | N/A |
| Minor Diameter | SAE B, 2 Bolt |
| Mounting | Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End | N/A |
| Shaft Type | 2500 |
| Port Size | 2400 |
| Major Diameter [Min | N/A |
| Cover End Pressure [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| Major Diameter [Max | N/A |
| Mounting Flange | N/A |
| Spline Description | N/A |
| Rotation | N/A |
| Model No. | N/A |
| Integral Valve Configuration | 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
| Seal Material | V2020-1F13S11S-1CC30L |
| Cover End RPM [Max | 2500 |
| Port Orientation - Shaft End | 2200 |
| Controlled Flow Rate | 16.5 |
| Shaft End Flow @ RPM | 19.5 |
| Pressure Port Size, Cover End | N/A |
| GPM @ 1,800 rpm, Shaft End | Outlet Inline w/Inlet |
| Pump Series | Outlet Inline w/Inlet |
| Relief Valve Setting | 3/4 in SAE O-Ring |
| Pressure Port Size, Shaft End | 3/4 in SAE O-Ring |
| Displacement Shaft End (cu in/revolution) | 2.6 |